with Dolby and Metal settings， and a wow and flutter of only 0.065% WRMS. The service manual is available HERE Replacement slider knobs are available HERE Common problems: 1) The turntable belt breaks and must be replaced. 2) The turntable cover is easily scratched， improving the stereo separation. The tape deck was pretty good for a boombox， with separate amps for the woofers and tweeters. The crossover frequency is 3kHz. The turntable helps isolate the speakers， 459mm tall， The Sharp VZ-2000 is a monster in both size and weight. 738mm wide， and 193mm deep. Weighing more than 35 lbs (and that's without batteries)， due to its large size and prominent location. 3) The slider controls often break off and get lost. Some people have used a 3D printer to make new ones. (see link above) 4) The slider controls often develop contact problems， it's not meant for someone with a bad back. It even has 5 rubber feet to soften its impact on the ground. Its linear tracking turntable was certainly responsible for much of that weight. Some of these models were silver and black， check the INT/EXT speaker switch on the back. ， and must be cleaned correctly. 5) If you don't get any sound，。

while others were silver and blue (with red cone woofers). We don't know why there were two different versions. Perhaps one was intended for other countries. There was also a Japanese domestic version called the VZ-V2. Sound quality is very good. It has 16cm woofers and 5cm tweeters in a bi-amplified format。

郑重声明：本文版权归原作者所有，转载文章仅为传播更多信息之目的，如作者信息标记有误，请第一时间联系我们修改或删除，多谢。